Tar solution with aromatic solvents of black and viscous color.
Its main purpose is to be used in the manufacture of tar epoxy for waterproofing and protection for aqueduct piping, gas pipeline and steel sheets that will be in contact with water, whether fresh or salt.
Density: 1,210 g / cm3
Flash Point: 35º C
Type of Solvents Aromatic solvents derived from carbohydrate products.
Precautions:
The product contains a solvent that exhales flammable vapor. Such a solvent can produce a toxic effect, whether absorbed by the skin or inhaled. It becomes essential when the product is in use: do not smoke, avoid flames or sparks, avoid sparks, avoid contact with skin, eyes and clothing. Indoors, ensure complete aeration using, if possible, forced ventilation to avoid accumulation of gases until the product is dry. In case of toxicity due to inhalation of the vapor concentration, remove the affected person to fresh air and in cases of acute intoxication, seek medical assistance. Remove contaminated clothing and dispose of it. In case of contact with eyes, rinse thoroughly with running water. In case of fire, use dry chemical powder, foam, sand or earth. Any product residue that dries in contact with the skin must be removed with an appropriate solvent.
Application Limit Temperature: 0 to 30º C
Application Method The surface must be perfectly dry, clean and free from oils, greases and suspended material. The solution should be agitated and applied by brush, roller or spray in a thin layer.
Drying Time 3 to 6 hours depending on existing conditions.
Cleaning the Tools Use petroleum solvent (Xylene).
Theoretical performance 1 to 1.5 l / m2 depending on the porosity of the base.
Packing In bulk and in 240 kg drums.
Storage Time Undefined when under good conditions (packages perfectly closed, sealed and in a covered place)
Storage Conditions Store in a covered and ventilated place.
NOTE: All application conditions are for the PX-80 solution. For its use with polyamide epoxy use the manufacturer’s instructions.
